4 Ways To Customize Your Mobile Home Windows

by Oct 7, 2019Blog, DIY, Remodeling




Without a doubt, one of the central features of any home’s exterior is its windows. These features are a surefire way to draw people’s eyes. So they are critical to the curb appeal of a property.

But they’re not just there to look pretty. The fixtures have loads of practical implications too. Therefore, they should be an essential part of any exterior renovation.

Featured image for "4 Ways To Customize Your Mobile Home Windows" blog post

Take a look below at four of the best ways to customize your mobile home. 




1 – Type of window

One major change that you can make is to replace the entire window. It is one of the customizations that will make the most significant impact. You can create a whole new look. But it can have practical merit too if you install a new type of window like the one that opens differently.

It is also a way that you can increase the value of your mobile home with a whopping 75.8% return on investment.

A few popular types of windows are:

  • Slider
  • Double-hung
  • Insulated windows
  • Vinyl frame
  • For security purposes, you can get a window with a grill frame

To replace them, you want to start by removing the old ones. Most windows are secured with screws to the wall. In mobile homes, siding might cover the edges, so you may need to remove a few sections before you can take out the frame.

After you have taken out the window, you can measure the size of the opening. Buy a frame that will fit into the gap.

Prepare the hole by scraping away any old putty or sealant. Install the new window with new screws. You will probably need to drill suitable holes into the frame.

Apply some sealant along the edges to make sure it fits snuggly.

2 – Size of the window

Are you always yearning for more light in your rooms? Or is there a fantastic view you are missing out on?

If so, the solution might be to install bigger windows. Like installing another type of frame, this can help you completely recreate the homes aesthetic both from the interior and exterior.

Nobody likes dark and cramped spaces. So you can almost guarantee that this will help you enjoy your mobile home even more. And other people will too.

Window of a home

But the project can be pretty challenging. We will look at increasing the size downward as this is one of the easiest options to DIY and you usually don’t need to get a permit. This is also called a cut-down. 

Start by removing the existing window. Once again, you probably need to take out its screws, and you might need to lift or remove same siding sections around it.

Buy the new window and measure its dimensions. Mark this out on the wall so that it overlaps and extends downwards from the existing gap. Use a saw to cut out the new parts of the opening. 

Install a sill plate to which you can attach the bottom of the frame. Attach the new window to the plate and the wall. Use shims to make the fit more secure.

Make sure to install some insulating foam around the edges of the frame and seal any gaps with silicone or putty.

Just remember that you need to check that any replacement windows comply with building regulations.




3 – Tinted windows

Another great way you can customize your windows is by applying tinted film to the glass. You might be more used to seeing this in commercial properties and even cars. But it is becoming more and more prevalent in homes as people are catching on to its benefits.

Advantages of the tinted film:

  • Can help keep your home cooler
  • Cuts out some glare from direct and reflected sunlight
  • Protects you from UV rays
  • Prevents colors in your furniture from fading due to exposure to sunlight
  • Enhances your privacy
  • Helps to hold broken glass in place preventing flying shards

Best of all, it is super easy to apply. 

First, pick the film you want to use. Measure out the size of the pieces you need and cut it.

Clean the windows thoroughly and dry them. You want to install it on the interior side of the glass. 

Peel the cover from the film and apply it to the window. Use a squeegee to press it to the glass and push any bubbles to the edges. You can cut off any overlapping edges with a carpet knife afterward.

Simple as that, you’re all done.

4 – Window boxes

We all need more color in our life. And flowers just might be one of the best ways to incorporate it. They can brighten even the gloomiest day.

That’s why a window box can be a fantastic way to customize your mobile home’s windows.

One of the most attractive ways to install them is by using wood brackets. 

You can do this by first choosing a box. Preferably, you want to get one with a flat back. Look for mounting that will work well with the dimensions of the planter. If you’re handy, you could even assemble your own.

Then take a pencil and mark where you want to install the brackets on the wall. Drill corresponding holes in the brackets and the wall and attach it with screws. For the sake of safety, you might want to secure the box to the mounting as well.

Now you can plant it with beautiful foliage of your choice.

Do it for the view

Window with a view

As humans, we are visual creatures. That’s why the way our homes look are so crucial to us. Windows are a vital part of any house’s aesthetic. Just like doors, it gives you access to the outside world and gives people a glimpse of your style.

So we recommended that if you haven’t done so yet, that you jump on customizing your mobile home windows.



 

Pin It on Pinterest

Share This